OpenWrt “Chaos Calmer” 15.05 发布，此版本现已提供下载：http://downloads.openwrt.org/chaos_calmer/15.05/。 相比 Barrier Breaker，值得关注的改进如下： * Linux kernel 3.18 * 安全更新 - Rewritten package signing architecture based on ed25519 - Added support for jails - Added support for hardened builds * 网络支持改进 - Added or improved support for lots of 3G/4G modems (MBIM, QMI, NCM, ...) - Added support for 464XLAT (CLAT) [RFC 6877 + RFC 7050] - Netfilter performance enhancements (conntrack route cache) - Improved support for self-managing networks [draft-ietf-homenet-hncp] - Better multi-core support for the network stack - Improved support for MAP-E, MAP-T and LW4over6 IPv4 transitioning technologies [draft-ietf-softwire-map, -map-t, -map-dhcp, -lw4over6] - Improved network auto-setup capable of detecting and bootstrapping IPv4-only, 6rd, Dual-Stack, IPv6-only, DS-Lite, LW4over6, MAP-E, MAP-T, 464XLAT and combinations without explicit configuration [based on RFC 7084] - Added support for Smart Queue Management (SQM) QoS, AQM and Traffic Shaping - Improved support for DNSSEC * 平台和驱动改进 - Added support for feeds of externally maintained targets - New mt7621 subtarget for Mediatek 11ac SoC - New mt76 mac80211 based wifi driver for MTK 11ac cores. - New mwlwifi mac80211 based wifi driver for the Marvell 88W8864 - New bcm53xx target for Broadcom ARM BCM47xx/53xx devices - New mxs target for Freescale i.MX23/28 family and various boards - New sunxi target for AllWinner A10/A13/A20 family and various boards - brcm2708: support for Raspberry Pi 2 - brcm63xx: support for BCM6318 and BCM63268 family - brcm63xx: improved fallback sprom support with bcma support 相比 RC 版本的改进： 相比 RC3 的改进： * Updated 3.18 to 3.18.20 * Security update of openssl to 1.0.2d * Security update of curl * brcmfmac: many BCM43602 related fixes * ar71xx: support more devices * brcm47xx/bcm53xx: support any NVRAM size * bcm53xx: basic Netgear R7000 support & R8000 image 相比 RC2 的改进： * brcmfmac: support for BCM43602 * mt76: updated version with new firmware support, TX & DMA fixes * Updated 3.18 to 3.18.17 * Fixed image builder generation * Various security updates (e.g. openssl, curl) * Minor fixes 相比 RC 1 的改进： * Fixed broken ImageBuilders for most targets * Updated 3.18 to 3.18.14 * Fixed broken IPv6 downstream DHCPv6-PD and onlink-route handling * Images (special format) for Asus brcm47xx and bcm53xx devices * Improved stability of sysupgrade on brcm47xx and bcm53xx * Added HTTPS enforcement option to uhttpd * Fixed umask issue * Added support for a few new boards 更多改进内容请看发行说明。 1. 关于 OpenWrt |
