给REDHAT加入BLUEPOINT的中文支持

首先,备份你的系统文件:
显卡驱动(如XF86_SVGA,视你的显卡而定),在/usr/X11R6/bin下.
内核,/boot下的所有文件.
设备驱动,/lib/modules/下的内核目录.
不要说你不会备份噢,cp总会吧,一个个地拷吧.除了显卡驱动,别的都可以不备份.

好了,备份完了,让我们正式开始:
先把BP光盘里的文件拷到硬盘里.在光盘的/BluePoint/RPMS下.
拷如下文件:
XFree86-XXXX-3.3.5-4BP.i386.rpm XXXX视你的显卡而定.
XFree86-Xnest-3.3.5-4BP.i386.rpm
XFree86-Xvfb-3.3.5-4BP.i386.rpm
XFree86-libs-3.3.5-4BP.i386.rpm
XFree86-xfs-3.3.5-4BP.i386.rpm
XFree86-zhfont-3.3.5-1.i386.rpm
bluepoint-release-1.0-1BP.noarch.rpm
chkfontpath-1.4.1-1BP.i386.rpm
cxwin-tools-1.0-2BP.i386.rpm
freetype-1.2-6.i386.rpm
kernel-2.2.13-1.i386.rpm
kernelcfg-0.5-6BP.i386.rpm
xfree-0.1-1BP.i386.rpm
zhcon-1.0-1.i386.rpm
zhttfonts-1.0-1BP.i386.rpm

好了,在KDE下打开文件管理器.找到你拷过来的文件.

以下这个必须最先安装:
0)单击bluepoint-release-1.0-1BP.noarch.rpm,会打开kpackage.勾中Replace
Files.点Install.装完后把kpackage关掉.

X中文支持:
1)单击XFree86-XXXX-3.3.5-4BP.i386.rpm,会打开kpackage.勾中Replace
Files.点Install.装完后把kpackage关掉.
2)单击XFree86-Xnest-3.3.5-4BP.i386.rpm,会打开kpackage.勾中Replace
Files.点Install.装完后把kpackage关掉.
3)单击XFree86-Xvfb-3.3.5-4BP.i386.rpm,会打开kpackage.勾中Replace
Files.点Install.装完后把kpackage关掉.
4)单击XFree86-libs-3.3.5-4BP.i386.rpm,会打开kpackage.勾中Replace
Files.点Install.装完后把kpackage关掉.
5)单击XFree86-xfs-3.3.5-4BP.i386.rpm,会打开kpackage.勾中Replace
Files.点Install.装完后把kpackage关掉.

X下的中文字体:
6)单击XFree86-zhfont-3.3.5-1.i386.rpm,会打开kpackage.勾中Replace
Files.点Install.装完后把kpackage关掉.
7)单击zhttfonts-1.0-1BP.i386.rpm,会打开kpackage.勾中Replace
Files.点Install.装完后把kpackage关掉.

字体支持:
8)单击chkfontpath-1.4.1-1BP.i386.rpm,会打开kpackage.勾中Replace
Files.点Install.装完后把kpackage关掉.
9)单击freetype-1.2-6.i386.rpm,会打开kpackage.勾中Replace
Files.点Install.装完后把kpackage关掉.
10)单击XFree86-XXXX-3.3.5-4BP.i386.rpm,会打开kpackage.勾中Replace
Files.点Install.装完后把kpackage关掉.
11)单击xfree-0.1-1BP.i386.rpm,会打开kpackage.勾中Replace
Files.点Install.装完后把kpackage关掉.